View EAST16084BA8_9010838.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2010, everlight all ri ghts reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com smd ? b EAST16084BA8 features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase refl ow solder process. ? mono - color type. ? pb - free. ? the product itself will remain within rohs compliant version ? compliance with eu reach ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). . description ? the smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting i n dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use.
datasheet smd ? b EAST16084BA8 2 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com device selection guide chip materials emitted color resin color ingan blue water clear absolute ma ximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v forward current i f 10 ma p eak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 40 mw electrostatic discharge esd hbm 150 v operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 10 0 soldering temperature tsol reflow soldering : 260 for 1 0 sec. hand soldering : 350 for 3 sec.
datasheet smd ? b EAST16084BA8 3 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition luminous intensity iv 18.0 ---- 45.0 mcd i f = 5 ma viewing angle 2 1/2 ----- 12 0 ----- deg peak wavelength p ----- 468 ----- nm dominant wavelength d 465.0 ---- 475.0 nm spectrum radiation bandwidth ----- 25 ----- nm forward voltage v f 2. 60 ----- 3. 00 v reve rse current i r ----- ----- 50 a v r = 5 v note: 1.tolerance of luminous intensity: 11% 2.tolerance of dominant wavelength 1nm 3. tolerance of forward voltage: 0. 05 v
datasheet smd ? b EAST16084BA8 4 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com bin range of luminous intensity bin code min. max. unit condition m1 18.0 22.5 mcd i f = 5 ma m2 22.5 28.5 n1 28.5 36.0 n2 36.0 45.0 bin range of dom. wavelength bin code min. max. unit condition x 465.0 470.0 nm i f = 5 ma y 470.0 475.0 bin range of forward voltage bin code min. max. unit condition 28 2.60 2 .70 v i f = 5 ma 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 note: 1.tolerance of luminous intensity: 11% 2.tolerance of dominant wavelength 1nm 3. tolerance of forward voltage: 0. 05 v
datasheet smd ? b EAST16084BA8 5 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com typical electro - optical characteristics curves
datasheet smd ? b EAST16084BA8 6 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com package dimension note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? b EAST16084BA8 7 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromatici ty coordinates & dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
datasheet smd ? b EAST16084BA8 8 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com carrier ta pe dimensions: loaded quantity 3 000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
datasheet smd ? b EAST16084BA8 9 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) ha s faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering i ron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of t he leds will or will not be damaged by repairing. pre-heating 150~200 c 60~120sec. above 217 c 60~150sec. 260 c max. 10sec. max. 6 c/sec.max. above255 c 30sec.max. 3 c/sec.max.
datasheet smd ? b EAST16084BA8 10 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everl ight americas before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document.
datasheet smd ? b EAST16084BA8 11 copyright ? 2010, everlight all rights reserved. release date : may.27.2017 issue no: dse - 0018173 rev.1 www.everlightamericas.com disclaimer 1. everlight reserves the right(s) on the adjustment of product material mix for the specification. 2. the p roduct meet s everlight published specification for a period of twelve (12 ) months from date of shipment. 3. th e graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. when using this product, please observe the absolute maximum ratings and the instructions for us ing outlined in these specification sheets. everlight ass umes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. these specification sheets include materials protected under co pyright of everlight. reproduction in any form is prohibited without obtaining everlight s prior consent . 6. this product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other applicat ion which can result in human injury or death. please contact authorized everlight sales agent for special application request.

▲Up To Search▲

Price & Availability of EAST16084BA8

	To Download EAST16084BA8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .